BB92(92mm) for 30mm Spindles

BB92-PF-MT-BLK-ASMWS

Size Guide
Bearing
Configuration Type

 

  • JUST THE FACTS:

    The BBInfinite BB92 for 30mm bottom bracket module allows the efficient use of a 30mm spindle crank set such as a RaceFace Cinch, EC90, Rotor Rex, Sram/Quarq, and most others.

    We’ve eradicated the dreaded BB92 CREAKS once and for all with our revolutionary one-piece design bottom bracket module for 30mm spindles. Bicycle frame manufacturers are unable to hold the precise tolerances necessary to fit multi-piece bottom brackets into frames properly, resulting in poor performance, short bearing life, and the noises that let you know the bearings are dying with each pedal stroke. By completely replacing this flawed set up with one of our legendary one-piece, precision bottom bracket modules, the frame is no longer in the equation, and you will at last enjoy the benefits of silence, durability, and buttery smooth power delivery that many thought impossible in a BB92 system utilizing a 30mm spindle crank set.

    The BBInfinite PressFit BB92 bottom bracket for 30mm RaceFace Cinch, Rotor Rex, Sram and other crank sets ships fully assembled and packaged with special press tools, retaining compound, instructions, and all necessary hardware.

    ABOUT OUR BEARING CHOICES:

    Ceramitech Bearings: Our Si3n4 hybrid ceramic bearings feature ultra-spherical silicon nitride balls matched to SAE 52100 chrome steel bearing races that have been processed with additional heat treatment and polishing steps. The result is a hybrid-ceramic bearing that lasts longer than any steel bearing with spin performance no steel bearing can rival. We’re so confident in the durability of our Ceramitech bearings that we back them with a Lifetime Bearing Exchange warranty. These bearings feature mid-contact seals for extreme performance and endurance. Each bearing comes lubricated with Kluber Isoflex Topas NB52. Lifetime Warranty.

    WS2 Coated Ceramitech Bearings: We took our amazing Ceramitech bearings and added an extremely durable, tungsten disulfide (WS2) coating that has a 0.03 coefficient of friction---which means it’s slicker than Teflon graphite, and even molybdenum disulfide. WS2 has an affinity for oils and greases, which means it maintains a hydrodynamic layer of lubricant where it’s needed most. The result is astonishing spin performance and increased endurance. These bearings feature mid-contact seals for extreme performance and durability. Each bearing comes lubricated with Kluber Isoflex Topas NB52. Lifetime Warranty.

    ABEC-7 Steel Bearings: Crafted from SAE 52100 chrome steel, our BBInfinite ABEC-7 (ISO 492, Class 4) bearings are so buttery that you’d have to buy our Ceramitechs to find anything better. These bearings feature mid-contact seals for extreme performance and durability. Each bearing comes lubricated with Kluber or Koyo. 1-Year Bearing Exchange Warranty.

    Why would I choose a 2-Piece bottom bracket system?

    Our 2-Piece Bottom Bracket system is for any bike that cannot accommodate our 1-piece unit. What would cause this? Easy; any obstruction that cannot be removed which prevents our 1-piece module from passing from one side to the other in a straight line through the frame bottom bracket shell, which includes:

    1) The presence of a hydraulic line that cannot be moved out of the way.

    2) An immovable fixture, hump, frame feature, or cable guide.

    3) Any wires that cannot be moved out of the way entirely.

    Over 90% of the bikes out there can use a 1-Piece module. If you are unsure please email us with the year, make, and model of your frame, along with the crank set model and type, at info@bbinfinite.com, and we’ll get you sorted.

    MORE THAN EXTREME SPEED AND SILENCE:

    BBInfinite bottom brackets for 30mm spindle crank sets maintain optimal chain-lines for crisp, consistent shifting and drivetrain performance while dishing out trouble-free mile after trouble-free mile. From the gorgeous, high-luster of our TypeII MilSpec hard anodized finish to the sculpted lines of our One-Piece design that unitizes the bottom bracket structure to eliminate all potential creaks before they start, every aspect of our arcitecture fuses beauty with durability and performnace.

     

    Our 30mm spindle optimized design is set to the widest stance the crank set allows while ensuring that interfaces between crank arm splines and spindle splines have maximum engagement and Q-factor is set as narrow as possible.

    POWER METER FRIENDLY

    All BBInfinite bottom brackets for 30mm spindle crank sets are 100% compatible with all crank-based power meters. Our flange-less drive-side arcitecture ensures zero interference with protruding power-meter back plates such as those found on Quarqs and SRMs.

    WHY DO BBINFINITE BOTTOM BRACKETS SPIN LIKE CRAZY?:

    Bicycle frame bottom bracket shells are notoriously misaligned, inconsistent, and out of round, and so it’s inadvisable to use the bike frame as the primary aligning member for bottom bracket bearings. Yet, that’s what our multi-piece bottom bracket competition does, and this explains why their systems frequently fail prematurely and creak.

    A BBInfinite OPD (One-Piece-Design) bottom bracket module is a CNC precision-machined hub---like the front wheel hub on your bike---that you press into your frame. And just like your trouble-free wheel hub, BBInfinite OPD bottom brackets have perfectly aligned bearings regardless of your frame’s BB shell alignment and tolerances. Perfectly aligned bearings are essential for thousands of miles of trouble-free use and extreme spin performance.

    WHAT KEEPS BBINFINITE BOTTOM BRACKETS FROM CREAKING?

    BBInfinite OPD is the answer for creaking bottom bracket problems as well. Pedaling forces conspire to lever, and rock, and eventually work multi-piece systems loose. The unitized nature of BBInfinite OPD cancels these forces out entirely, which means creaking has no place to start in the first place. It really is that simple.

    INSTALLATION IS A SNAP WITH BBINFINITE:

    Every BBInfinite module ships with the special press tools, hardware, instructions, and the retaining compound you need to get the job done correctly with ease and confidence. All you need is the press for this road bike bottom bracket. If you need a press, check out our Master Tool Press.

     

  • Installation Instructions

    1 Piece BB Instructions
    2 Piece BB Instructions
  • Technical Specifications

    1-Piece Weight:

    WS2: 76g | CERAMITECH: 78g | ABEC-7 SS: 81g

    Frame Width: 92mm

    Frame Diameter: 41mm

    Spindle Diameter: 30mm

    2-Piece Weight:

    WS2: 45g | CERAMITECH: 47g | ABEC-7 SS: 50g

    Frame Width: 92mm

    Frame Diameter: 41mm

    Spindle Diameter: 30mm

    Bearing Size: 4030

    Ceramitech 4030 | ABEC-7 4030

  • Spacers Stack for BB92-PF-MT

    BB92-PF-MT MTB Crank Spacer Chart

    Crank Length(mm) Spacer SKU
    110.75 -
    116.25 Spacer-2.5MM-SET
    118.25 Spacer-2.5mm-4.75mm-SET


Customer Reviews

Based on 1 review Write a review
Bottom Bracket Selection Guide