M30 cranks have a unique spindle design that's 28mm on one side and 30mm on the other. This, and a rather unique bearing spacing means that simply adapting a 30mm bottom bracket has not been an option, and so everyone running these excellent cranks were stuck with the lackluster performance of Praxis bottom brackets; until now. Our 1-piece, hub-style, M30 bottom bracket modules harness the potential of an M30 crank set to unleash the superb spin performance that was hidden in the design the entire time. Check us out at www.bbinfinite.com YouTube link to video showing how the TruDrive Sleeve works: PressFit 30 Perfection
here is a praxis M30 crank for those of you who don't know. Most of you probably don't. M30 cranks are 30mm on one side and then on the other they are right at 28mm. This causes a definite problem when you have most bottom brackets out there work with a 30mm crank or they're DUB and they're 29mm. Praxis is very unique, what they basically have made is basically like a really oversized aluminum spindle version of a GXP crank. Which is what we have right here. Now we have a solution for Praxis M30 cranks that are compatible with all of our all of our PressFit bottom brackets and we also have it for threaded bottom brackets as well which will be exciting for a lot of BMX guys because box makes m30 cranks so we're going to have a whole line of BMX bottom brackets coming out very soon now all we need for our PressFIT ones is you're just going to need this little conversion kit right there and you can go ahead and convert any BBInfinite 30mm or bottom bracket to use a praxis m30 crank
Comments will be approved before showing up.