The BBInfinite BB30-PF one-piece module fits in a BB30 bike that is running a 30mm spindle crank. Whether you have a 68mm or 73mm wide frame bottom bracket shell, we've got you covered. Why doesn't your BB30 cranks spin like this? Does it creak? It will spin like mad in absolute silence with a BBInfinite BB30 module for 30mm spindles. Let's install one now. Oh, and if you've got a Shimano, GXP, or Campagnolo crank in your BB30 bike, head over to BBInfinite.com to see our full lineup. I've already removed the crank, the bearings, and the snap rings so that the BBInfinite module can go through unobstructed. We just start it by hand and it'll stay right there. Without any grease on the module we're going to begin pressing. We're going to use our BBInfinite master tool press for this. Add a little Vibra-Tite to the module and press it home. All I did was throw the crank in the freezer for an hour or so and this will make it slide in a lot easier and I won't have to use a hammer, and it allows the wave washer to compress correctly. I would have had to use the hammer there. Let's get this thing bolted together before it thaws out. Well there you have it BBInfinite has cured all that ails BB30 and BB30A. Now all you need to do is go get one for yourself. We have your BB30 solution today.
Comments will be approved before showing up.