Speed demands a bottom bracket that maintains an absolutely precise relationship between the inner race, ball bearings, and the outer race. When one-size-fits-all plastic, or alloy housings are pressed into undersized frame shells, the lack of precision means radial compression of the outer races, which squeezes the ball bearings onto the inner races, causing tight bearings that will never run smoothly. When your bike was built, or that new crank was installed, your bearings were misaligned by a mechanic who followed the instructions to the letter. Pre-load forced the inner races inward, twisting the ball bearings out of place, creating chaos in your drive train. Creaking is more than just an annoyance, it's a sign that your wattage is being squandered. In some cases cups walk out of the frame entirely. In every case, your speed is lost. Now let's take the same bike and press in a BBInfinite module. Our One-Piece design can't creak or walk out. Our frame specific diameter matches a module's outer diameter to individual frame model specifications for that perfect fit. Radial compression is eliminated, and with it, wattage-sapping drag. At the heart of every BBInfinite module is the Tru-Drive race support system, engineered to eliminate deflection of the inner races caused by bearing pre-load. the ultra-light, Tru-Drive sleeve is CNC precision ground to support and align the inner races of each bearing. The module becomes a perfect rotational environment, ensuring that every pedal stroke drives you forward. You've worked too hard, suffered too long, and sacrificed too much to let another watt go to waste. BBInfinite: Become infinitely faster.
Comments will be approved before showing up.